I kassen finder du:
1 Sailserver
1 GSM antenne for mobilnettet
1 Grøn stik til NMEA183 og SeaTalk 1 (Monteret i Sailserver)
1 NMEA2000 kabel

Noter venligst eller tag et billede af Sailserver ID som findes bagsiden af Sailserver. Sailserver ID skal bruges under registrering og tilknyttes båden.

Sailserver kan forbindes til moderne instrumenter med NMEA 2000 eller SeaTalk NG, men også til klassiske instrumenter med NMEA 0183 eller SeaTalk 1.

Sailserver vil stadigt fungere uden tilslutnibng til bådens instrumenter, men kun med informationer fra den interne GPS.

Status LED

På fronten af Sailserver er der en status LED der hjælper under installationen, samt ved evt. fejlfinding.


Grøn lys - Gyldig GPS position fundet.

Rød lys - Ingen GPS position fundet endnu.

Blå lys - Midlertidig tilstand. Antal blink ikke relevant.


1 blink - Sailserver er på Internettet

2 blink - Sailserver midlertidig ikke på Internettet.

3 blink - Sailserver starter op eller Internet ikke mulig.

4 blink - Sailserver har fejl under opstart.


Installation med NMEA2000 netværk

NMEA 2000 is a system used for sharing data between different instruments. NMEA 2000 is based on a single cable called backbone. Each instrument is connected to the backbone with a NMEA 2000 cable also called a drop cable. The backbone is connected to 12V, so the instruments can also get its power through the NMEA 2000 cable.
SeaTalk NG and SimNet are also NMEA2000 networks but with different types of connectors.
All cables needed can be found in our webshop.



Installation uden NMEA2000 netværk

For installations without a NMEA 2000 network, the Sailserver has to be powered through the NMEA 2000 connector.
A NMEA 2000 cable can be used for that.

Forbind Sailserver til Internettet

Sailserver has a mobile network modem build in.

It will require a SIM card for a mobile network.

All Sailservers comes with a prepaid SIM card that gives access to the Internet for more than 10 years. 

The data usage is about 20MB / month if the Sailserver is switched on 24/7.

Power off the Sailserver before inserting the SIM card.

The SIM card may not be pin locked.

Sailserver can also be connected with an ethernet cable to an onboard Internet router.


LED will show status if it is connected to the Internet.

1 fashs, Connected to the Internet.

2 flashes, Temporarily No Internet, Registed to the mobile network, but no Internet access at the moment. It might be bad coverage.

3 flashes,ng up, No Internet, Action needed, SIM card was found, but it is pin locked or not able to register to the mobile network.

4 flashes, Faulty Sailserver

Opret en konto

On the Login page you will find a Signup button. Please type your full name and email, and follow the instructions on the screen.


After you have logged in, it is time to link your Sailserver to your boat. For that you will need the Sailserver Id found on the back of the Sailserver.


From the menu please go to: Account / Profile / Boat

Please press the button on the Sailserver, and the LED will start to flash blue.

Sailserver will now contact sailserver.com and be ready to link to a boat. It may take up to 1 minute before it is ready.

Press Add boat and follow the instructions on the screen.


It is now time to go sailing.


Each time you finish a sailing trip, it will show up under the menu Track.

Under Dashboard, live data from you board, delayed up to 1 minute.